Advanced Search - Program Type: Shareware - (Search in: Keywords) - Page # 1 of 2

myNetMon, Network Monitor and Packet Analyzing Tool (V.2.0)
myNetMon is windows based network monitor and packet analyzing (sniffer) tool.
myNetMon uses WinPcap, a windows port of Libpcap which is a packet capturing library.
Features:
* Physicial (Ethernet),
* ARP, RARP, IPX, IPV4-6,
* Displaying ICMP, UDP, TCP ... packets according to their features,
* Displaying packets in hexadecimal form,
* Listing packets accoring to their types, protocols, MAC Addresses, IP Addresses and Ports,
* Capturing only required packets (Layer 2/3, Protocol (ARP, TCP-UDP-ICMP...),
port based (TCP: 23, 25, 80 ..., UDP: 53, 139 ...), Host to host, Client to host...,
packet's length, All these filterings can be created with BPF (Berkeley Packet Filtering) rules,
* Changing the content of packets (Packet Forging) and sending to the network,
* Reconstruction of TCP packets (So web traffic is saved as Html, Gif, Css, Zip, Mp3...,
e-mail traffic saved as .eml, news traffic saved as .nws and FTP Data session's can be saved)
* Saving captured packets,
* Opening and analyzing files, saved with Libpcap (Tcpdump, Ethereal),
* Anti anti sniff option.....
Please install winpcap (http://netgroup-serv.polito.it/winpcap) before running myNetMon.

Acts as both client and server program. IPUP will sit quite happily on your system tray and even email you when an IP notification is received, ideal if you are away from the office and need to easily get your clients IP address.

By purchasing a single license you are entitled to run one server and one client. With a site license you are free to distribute it within your company and to your clients. With a world license you are unrestricted. IPUP is provided as a 30 day trial with no nagscreens and no restrictions.

NetNak is a small system-tray utility that graphically displays the data-transfer rate of your modem, cable DSL etc. It's attractive and easy to use. You see real-time graphs and text for both sent and received data. If you wish, you can set the display to dock to the top or bottom of your screen. You can also set it to display only when an active connection is detected, and to auto-hide - much like the Windows taskbar. NetNak provides a separate display that shows online time as well as accumulated connection statistics (hourly, daily, monthly, or just the last 5 minutes). Other features include custom warnings, an automatic disconnect feature, security options, and special support for modem sharing.

A dockable bar that shows you often used information like time, day, date, CPU and memory usage, disk space and internet data speed. You also have access to a calendar that has the useful feature of showing how may days until or since any date. You can easily set up QuickStart buttons on NikNak to start your favorite programs saving screen space. The dockable bar can be docked on any edge and can also be set to autohide - so it can visible only when you need it.

See how your computer is performing in a variety of different graphical formats. It can also be used as a screen saver. You can monitor such details as memory, disk space, disk usage, CPU usage, internet data rates etc. The graphical formats available are highly customizable and you can mix and match to get the display you want.

Basic like script engine for building Windows applications, targeted to serial and TCPIP comms.
Can handle not only basic tasks like open/close ports, write/read data, but more, like waiting for specific data to be received, process data, sending data in various modes. Can read and send messages over a TCP/IP network.
It has a free tool, Rack Designer, to easily design virtual instruments that can be used to build a cheap but versatile platform for virtual instrumentation.
A custom serial terminal that will suits your needs can be built in no more than 17 lines of script, a phone dialer in no more than 15 minutes and a network messenger in 22 lines !
It is the perfect tool for microcontroller hobbyists to debug, control their serial devices, even from a remote PC. Also a perfect for data logging/monitoring.

The Haxxio UDP Serial Port Redirector is the missing link between devices that speak UDP on your network and are thus "connected" to your PC, via an Ethernet port (specifically UDP over IP) and Windows applications on the PC that can only talk to a serial port. Most applications for the Redirector are based on one of

(a) Replacing a simple serial connection, either RS232 or RS485, with a network connection, thus simplifying the connection and removing the cable length barrier, up to the point of crossing the planet.

(b) Requiring to communicate RS232 over a wireless connection between either PCs, or PCs and terminal servers - Wireless ethernet is much cheaper and more available than wireless RS232. Examples

(c) Enabling a group of PCs and/or other devices to all communicate with each other. This can be arranged by having all the devices broadcast their messages, and by using the UDP Redirector on on one or more PCs, these PCs can also be part of this communicating group.

MarshallSoft SMTP/POP3/IMAP PowerBASIC email component library (SEE4PB) uses a simple API to send and receive mail, including HTML, MIME Base64 and quoted-printable encoded attachments, from within a PowerBASIC application. Supports all versions of 32-bit PowerBASIC. Knowledge of Winsock and TCP/IP is not needed. Features of SEE4PB include: Send email with inline HTML, GIF, TIF, JPG, BMP and Rich Text attachments. Supports ISO-8859 and UTF-8 character coding. Get the number of messages on your email server. Get the header lines from any email on your server without reading the entire email. Delete any email on the server without downloading the entire email. Copy any email on the server without deleting it. Receive any email on your server including MIME attachments. Download email from your server, automatically decoding MIME attachments. Copy email and navigate between IMAP mailboxes. Dozens of switches that control how email is sent and received. Run up to 128 independent WIN32 threads concurrently. Supports SMTP (ESMTP) and POP3 authentication. Supports multiple (simultaneous) connections. Supports bulk mail on a distribution list. Set return receipt; add TO, CC, BCC recipients. SEE4PB is a standard Windows DLL that does not depend on support libraries. Makes calls to Windows API functions only. The same SEE32.DLL can be called from any supported language. Also use with C/C++, Delphi, Visual Basic, VB.Net, Visual FoxPro, Visual dBase, Xbase++, and COBOL. Free technical support and updates for one year. Royalty free distribution with your compiled application. A large selection of example programs is included. SEE4PB can be used in the development of Win32 applications running under Win 95/98/Me/NT/2000/XP/Vista. The evaulation version is fully functional. No unlock code is required.

MarshallSoft SMTP/POP3/IMAP Visual Basic email component library (SEE4VB) uses a simple API to send and receive mail, including HTML, MIME Base64 and quoted-printable encoded attachments, from within an application. Supports all versions of Visual Basic, Visual Studio, and VB.NET. Knowledge of Winsock and TCP/IP is not needed. Features of SEE4VB include: Supports 32 bit and 64 bit programs. Send email with inline HTML, GIF, TIF, JPG, BMP and Rich Text attachments. Supports ISO-8859 and UTF-8 character coding. Get the number of messages on your email server. Get the header lines from any email on your server without reading the entire email. Delete any email on the server without downloading the entire email. Copy any email on the server without deleting it. Receive any email on your server including MIME attachments. Download email from your server, automatically decoding MIME attachments. Copy email and navigate between IMAP mailboxes. Dozens of switches that control how email is sent and received. Run up to 128 independent Windows threads concurrently. Supports SMTP (ESMTP) and POP3 authentication. Supports multiple (simultaneous) connections. Supports bulk mail on a distribution list. Set return receipt; add TO, CC, BCC recipients. SEE4VB is a standard Windows DLL that does not depend on support libraries. Makes calls to Windows API functions only. The same SEE32.DLL (and SEE64.DLL) can be called from any supported language. Also use with C/C++/C#, Delphi, PowerBASIC (PB/CC, PB/DLL, PB/WIN), Visual FoxPro, Visual dBase, Xbase++, and COBOL. Free technical support and updates for one year. Royalty free distribution with your compiled application. A large selection of example programs is included. SEE4VB can be used in the development of Win32 and Win64 applications running under Win 95/98/Me/NT/2000/XP/Vista. The evaulation version is fully functional. No unlock code is required.

MarshallSoft SMTP/POP3/IMAP XBase++ email component library (SEE4XB) uses a simple API to send and receive mail, including HTML, MIME Base64 and quoted-printable encoded attachments, from within an application. Supports all versions of Alaska XBase++. Knowledge of Winsock and TCP/IP is not needed. Features of SEE4XB include: Send email with inline HTML, GIF, TIF, JPG, BMP and Rich Text attachments. Supports ISO-8859 and UTF-8 character coding. Get the number of messages on your email server. Get the header lines from any email on your server without reading the entire email. Delete any email on the server without downloading the entire email. Copy any email on the server without deleting it. Receive any email on your server including MIME attachments. Download email from your server, automatically decoding MIME attachments. Copy email and navigate between IMAP mailboxes. Dozens of switches that control how email is sent and received. Run up to 128 independent WIN32 threads concurrently. Supports SMTP (ESMTP) and POP3 authentication. Supports multiple (simultaneous) connections. Supports bulk mail on a distribution list. Set return receipt; add TO, CC, BCC recipients. SEE4FP is a standard Windows DLL that does not depend on support libraries. Makes calls to Windows API functions only. The same SEE32.DLL can be called from any supported language. Also use with C/C++, Delphi, Visual Basic, Visual FoxPro, PowerBASIC (PB/CC, PB/DLL, PB/WIN), Visual dBase, and COBOL. Free technical support and updates for one year. Royalty free distribution with your compiled application. A large selection of example programs is included. SEE4XB can be used in the development of Win32 applications running under Win 95/98/Me/NT/2000/XP/Vista. The evaulation version is fully functional. No unlock code is required.

To view the camera ip axis and Sony directly in your PC you can also move the camera sony RZ30 - like professional CCTV - In a moving window you can see 1 - 4 or 9 cameras - you can resize the
windows

MarshallSoft SMTP/POP3/IMAP COBOL email component library (SEE4CB) uses a simple API to send and receive mail, including HTML, MIME Base64 and quoted-printable encoded attachments, from within a COBOL application. Supports all versions of 32-bit Fujitsu COBOL. Also use with other Win32 COBOLs. Knowledge of Winsock and TCP/IP is not needed. Features of SEE4CB include: Send email with inline HTML, GIF, TIF, JPG, BMP and Rich Text attachments. Supports ISO-8859 and UTF-8 character coding. Get the number of messages on your email server. Get the header lines from any email on your server without reading the entire email. Delete any email on the server without downloading the entire email. Copy any email on the server without deleting it. Receive any email on your server including MIME attachments. Download email from your server, automatically decoding MIME attachments. Copy email and navigate between IMAP mailboxes. Dozens of switches that control how email is sent and received. Run up to 128 independent WIN32 threads concurrently. Supports SMTP (ESMTP) and POP3 authentication. Supports multiple (simultaneous) connections. Supports bulk mail on a distribution list. Set return receipt; add TO, CC, BCC recipients. SEE4CB is a standard Windows DLL that does not depend on support libraries. Makes calls to Windows API functions only. The same SEE32.DLL can be called from any supported language. Also use with C/C++, Delphi, Visual Basic, VB.Net, Visual FoxPro, Visual dBase, Xbase++, and COBOL. Free technical support and updates for one year. Royalty free distribution with your compiled application. A large selection of example programs is included. SEE4CB can be used in the development of Win32 applications running under Win 95/98/Me/NT/2000/XP/Vista. The evaulation version is fully functional. No unlock code is required.

Cluster - Load Balance software enables multiple real servers to work as one powerful, reliable, scalable and easy to manage Web server cluster. Cluster - Load Balance is Windows-based traffic and content manager providing the scalable and highly available TCP / IP data transportation, IP Failover management solution for Internet, Intranet and cluster applications. Load Balance is high availability software package with relay tunnel and proxy technology to perform high number of connections, low response time, continuous availability and powerful security . Load Balancing URL (Http://, Https://, Ftp://, Mms://) Redirection and IP Switch (TCP/IP Failover) tools.

RemoteNet is an automation control program that lets you work on another computer remotely . The remote computer can be anywhere on the Internet or in your local network. You could see the remote computer's screen on your own monitor as the full screen. Your mouse and keyboard then control the other computer,communicating with each other using microphones and speakers. RemoteNet Professional is the professional version of RemoteNet. Included: Transfer files from or to remote PC, Real Time display remote PC screen on you own PC, Chat room from and to remote PC, Broadcasting message to remote PC. The professional version uses Cluster Monitor technique and lets manager to view all clients' screens at real time. Included file transfer, screen control, voice conversation, and Macro editor tools.

RemoteNet is software that lets you work on another computer remotely. You can access, view and control the other computer via the Internet or across a local network. As well as being able to transfer files and alter system settings, this remote control software also lets you see the remote computer's screen on your own monitor. Your mouse and keyboard then control the other computer, communicating with each other using microphones and speakers, allowing you to work on it just as if you were sitting right in front of it. Controlling another machine, altering system settings, installing software and helping another user have never been so simple. RemoteNet gives you access to the other systems' screens without having to move to another desk, office or building. Included file transfer, screen control, and voice conversations.

Web Page Remote is remote control software which allows you to remotely control a PC from a web browser at any location in the world. Web Page Remote provides fastest, simplest ways and it is an ideal tool to make software demonstrations, or provide customer supports remotely , such as File transfer Download, Upload files, Real time screen view to remote client computer, Chat room, and Voice conversations, Voice over IP, VOIP, enable two users to communicate with each other using microphones and speakers.

Cribbage.ca is a bilingual (french/english) cribbage card game. Play crib against the computer or online with a friend over TCP/IP. Many feature for rookies to learn how to play the game and lots of users settings like difficulty level, players statistics, game speed, user language, text colors, background texture, board position, autocount points, possible hand/points display, hands points breakdown, flip played cards, connect to remote player with tcp/ip, chat while playing, backcard selection, rules and other... You may also chat as you play online with a friend. Your settings are saved in your user file.You may carry and use it on other computers running the game without changing a thing, just copy the file in the games directory. Update verification, web page access are as easy as click! Lots of settings, speed graphics and fun. Updates for the game are often available since the game is constantly being improved. Free download.

Cribbage.ca est un jeu de cribbage bilingue qui joue contre l'ordinateur ou en-ligne par tcp/ip. Des fonctions pour les débutant afin d'apprendre et configurer le jeu sont disponibles au usagers. Vous pouvez configurer la vitesse, language, couleurs de textes, texture de fond, niveau de difficulté, auto-compte des points, coté de la plache a points, endos de cartes, rčgles du jeu ... Des statistiqeus de jeu et aide pour selectionner les mains sont disponible ainsi que l'énumération des points de la main. Vous pouvez clavarder en joueant en ligne avec un ami. Le tout sauvegardé dans votre fichier utilisateur transportable sur tout ordinateur qui roule le jeu. Les mises ŕ jour sont fréquentes car le jeu est constamment amélioré. Téléchargement gratuit.

Advanced Virtual COM Port is the first software of its kind which includes both local and network
virtual COM port functions.

It can share your real COM ports or it can create virtual COM ports and connect them with a
virtual null-modem cable locally or through a TCP/IP network or the Internet.

You can connect to a shared port and use it just like it is on your machine. Virtual serial ports
created by the program look and work the same way as real ones look and work.

Main features:
- Virtual COM Ports appear to the system and applications like real ones
- Virtual COM Ports work like real ones
- 64-Bit compatible (AMD64)
- Hot Virtual COM Port creation and removal (no need to reboot the computer)
- Once created, Virtual COM Ports persist in the system until you remove them
- No need to have physical serial ports (except for the physical ports sharing function)
- Higher data transfer rate than on hardware serial ports
- Up to 255 Virtual COM Ports can be created
- PnP, WMI support
- Flow control emulation supported
- Easy port state monitoring
- Ability to temporarily remove all ports without losing their configuration

Capturix NETWorks is a network utility software that ables you to test and diagnose all common problems from any network. It brings a group of very useful tools like: System Information that can show all information related with a specific network card or connection, Speed Meter, Route Information, IP config, Send Mail, Port Scanner with port description that have thousands of trojans port information and almost all protocols used for each port, Trace Route, Ping, command Tester, HTTP server, DNS Lookup and a worldwide WHOis client. Exploit tester and Bandwidth Log. Now It brings the Connection Watcher software. PingCheck lets you ping a list of servers and send a e-mail in case of malfunction. Now includes a Packet Sniffer for debugging operations. Default Password List for the most common network devices.

AdapterWatch displays useful information about your network adapters: IP addresses, Hardware address, WINS servers, DNS servers, MTU value, Number of bytes received or sent, The current transfer speed, and more. In addition, it displays general TCP/IP/UDP/ICMP statistics for your local computer.

Serial to Ethernet Connector is an advanced software solution developed to share serial port devices over TCP/IP network. Thus, any serial port device connected to COM port at local PC could be accessed from anywhere in the world via internet, for example. When the attached serial port device sends communication data it will be actually transmitted over TCP/IP network. Such behavior is achieved due to the use of virtual serial port technology which emulates standard COM ports. In that case Windows OS treats virtual serial ports in the same way as real ones therefore you are no longer limited to just two real ports (any number of physical ports you have) per system and may create COM port connections without occupying any real serial port. Formerly known as VSPD.Net, Serial to Ethernet Connector has a completely new interface and greatly revamped engine. It allows you to use three different types to connect to remote computer. The first type is port-to-port connection, which lets you connect two computers through TCP/IP network. In this way you can emulate virtual null-modem cable connection. Serial to Ethernet Connector allows you to customize remote serial port settings locally or dynamically fetch these settings from the remote end. Second type is the port-to-TCP client, which allows you to connect to remote server and send/receive communication serial data over TCP/IP network. Once connection is established, all data sent from remote serial port device, attached to the server, will be genuinely delivered to local serial port where it can be further processed. The last type is the port-to-TCP server which allows you establish multiple connections to local serial port device and redistribute COM port device data all over the world. Server listens to all incoming connections at the defined TCP port and redirects input/output serial data to TCP/IP network. Serial to Ethernet Connector can be easily configured for current demands.

Fast, easy and inexpensive LPD print server for Windows. SDI LPD prints reports from IBM zSeries (mainframe) iSeries (AS/400) and UNIX systems on your Windows local or network printers. Handles TCP/IP network printing for LAN, WAN or the Internet.

sMonitor is a network monitoring software that allows you to verify the network connectivity of TCP/IP hosts on the Internet and LAN. The program periodically pings, or checks TCP and UDP ports on user specified computers or other network devices. If the destination host fails to reply to a ping, connection request, or user datagram, sMonitor alerts you using audible alarms, visible notifications, e-mail messages, third-party software, modem and telnet connections. Also, the program generates log files, CSV format files, creates and uploads by FTP the HTML file, which reflects a current status. Based on test results, the program can operate remote systems (power management, reboot, alarm reporting) by modem and telnet using custom scripts. sMonitor can run as standard Windows application or NT service.

Fping is a console program, much like the ping program that comes with windows.
Fping has the same options as the regular ping, and several options that are unique:
- Time between pings can be adjusted at wish, ranging from 1ms to 5s.
- Beep on every (un)successful reply. Use this to test your network status in the background.
- Ping multiple hosts with one simple command.
- Ping using raw sockets, or use the ICMP dll. The choice is up 2 you

Virtual Modem PRO 3.0 creates software virtual IP-modems and maps them to virtual serial ports in Windows OS. The product was developed to emulate standard hardware modems. New feature of Virtual Modem PRO enables not only to fully emulate Fax Class 1 modems, but also send faxes to any place on the Internet using virtual modems. All major software fax applications are supported (Microsoft Fax/Ventafax/SnappyFax 2000/Mighty Fax). So you may set up and use Windows Fax service or any third-party application to send/receive faxes to any host on the Internet without hardware modems. Save you money on purchasing fax machine and sending long-distance faxes by using fast and reliable virtual modems! The main difference is that instead of using conventional telephone line, it uses Ethernet network, including Internet, VLAN, VPN, etc. Virtual modems are connected to the computer via serial ports (COM1/COM2 or Virtual modem uses virtual serial ports that are complete copies of real serial ports. The main advantages of Virtual Modem Pro is speed and reliability of the transmitted data (since it uses fast Ethernet network and reliable TCP/IP protocol) as well as a considerable number (up to 255) of modems that can be created in any system. Every automation system that collects data from the remote hosts using modem and telephone line can greatly benefit from implementing Virtual Modem PRO. Among these are manufacturing/warehouse DAQ systems, fiscal/data transfers in a banking system, retail management, etc. Virtual Modem PRO uses virtual serial ports technology which fully emulates real serial ports and duplicates all their functionality. To create such connection the first virtual modem (local host) should be configured as a TCP/IP server that listens to incoming connections, while the other one (remote host) should be configured as a client to initiate the call.

A one of a kind bingo game that you can play on a personal computer either by yourself or with others via a local area network. What makes our bingo game stand out from all of the others is our extensive set of features and configurations that combined can give you over 100 different ways to play bingo!!

One of the things that makes this software unique is the statistical race to be the best between you and 63 other computer opponents. You can configure each style of play so that you only have to face a few of the 63 computer players at a time. The computer players you don't directly compete against, compete against one another. When all is said and done the person with the best statistics is ranked #1.

There are several different styles of play.

Classic - Nothing Special Here. Just plain old bingo at its best. (default 3 computer players)
Bingo Boxing - The first person to win 4 classic bingo games wins this event. (default 3 computer players)

Speed - The first person to complete 4 (default) separate bingo patterns wins this event. (default 3 computer players)

Racing - Who ever comes in first gets the most points during the round. After 8 (default) rounds, who ever has the most points wins this game. (default 7 computer players)

Elimination - Each round a certain number of players are eliminated from play. If you are the last one standing you win. Kind of like musical chairs, just with bingo.

Tournament - Need we say more? Classic Bingo presented in a style of a sweet 16 (default) tournament. There is also a double elimination mode.

The demo version allows you to sample classic bingo along with one other random style of bingo for 30 days. There is more to this game than meets the eye... play it all for just $24.95... order now!!

Safabyte Network Pro Suite is a combination of two professional suites Safabyte Network Suite and Safabyte Mail Pro Suite. With easy-to-use components covering the most popular Internet protocols and includes FTP/SSL, SFTP, ICMP, DNS, NTP (Internet Time), Domain Who Is, Trace Route, Proxy, Mail, IMAP, POP3, SMTP and Dynamic Template, it will help you to build scalable Internet/Intranet client and server applications. The ZipLite component is FREELY included in this suite as a bonus.

ANPOP is a high performance and easy-to-use POP3/IMAP4 component. It enables your ASP, VB, VC++, C#, VB.NET, ASP.NET, VBS, Jscript, WScript, Delphii or other COM environment application to retrieve email from email server using POP3 and IMAP4 protocols and parse email based on MIME. ANPOP supports all operations of POP3/IMAP4 protocol and provides many advanced features as follows:
- Support POP3 commands: USER, PASS, APOP, NOOP, RSET, TOP, LIST, STAT,UIDL, RETR, QUIT;
- Support synchronous and asynchronous mode;
- Get email header without downloading the whole email from server;
- Get email size/message-id from server;
- Delete/Undelete email;
- Log file to record all sessions between client and server;
- Load email from file or binary stream;
- Save email to file or IMSGSTORE interface;
- Get specified header value of email;
- Parse sender, recipients, subject, body and attachments;
- Export attachment to file or binary stream;
- Create customize mailbox to store email files;
- Load email to IPOPMSG interface;
- Save/Move/Delete/Enumerate emails in specified mailbox;
- Create/Clear/Delete mailbox;
- Send request of retrieving email to local/remote service;
- Enable ASP/ASP.NET to retrieve emails in background;
- Unlimited queued request;
- Edit email headers;
- Support SSL/TLS connection;
- Support Secure Password Authentication(SPA);
- Decrypt encrypted email and verify digital signature;
- Support IPv6;
- Support IMAP4;
- Support pasing winmail.dat (TNEF attachment);
- Retrieve emails via socks4/socks5/http proxy connection.
- and more.

Adaptive Home Logic is an advanced, highly flexible, easy to use home automation / remote access application that can seamlessly coordinate and control home lighting, HVAC, security and home theatre systems from your Windows XP computer. Version 2 includes full two-way support for X10 and the latest UPB power line modules, two-way prioritised speech system, TCP/IP client / server communication ability, Remote Internet Telnet Access, RSS Weather & News Feeds, Virtual Weather Station Graphical Display within a new user interface with display mapping. Other features include scheduling / conditional events, APRS remote access via amateur radio, Digital I/O, multiple serial port communication, E-mail Alerts, Sun rise/set times, It can even be accessed via a mobile phone + more!

IP Shifter is a smart software tool that helps you to change your TCP/IP related settings easily and quickly. If you work dynamically at several locations in the network (due to business), you need to be connected in different offices, or you need to use your computer in more than one network, in these cases, you have to change your IP address parameters (e.g. IP address, Subnet mask, Gateway, DNS, Proxy) frequently, so IP Shifter is a product for you! It can help you to finish this activity.
It can handle multiple network adapters! That means that each configuration could be defined for the specific adapter and you can choose any of the currently enabled adapters.
You do not need to reboot your PC every time after applying of the selected configuration. your new configuration will be active in the system instantly.

PortMarshaller is a software-based TCP/IP port forwarder and network administration service. The software accepts connections on a particular TCP port, and establishes connections to a different TCP port to fulfill requests. This capability offers a solution to various network topology problems. Administrative web interface allows the monitoring of connection and data transfer statistics. New access control lists allow the filtering of incoming connections. Optionally integrates with Internet Information Services (IIS) for its advanced abilities.

There are many old data-centric applications that, for historical reasons, use direct modem connections to exchange data between Client and Server. Nowadays, local and global TCP/IP networks have made the direct modem connection obsolete.

Here's why: When you use a direct modem connection, you need to have a physical modem installed on each PC that needs to exchange data. You also must use a physical phone line. This makes the line busy and may even be costly, if long distance calls are required. Modem transfers are also not secure. A hacker doesn't even need to have an access to your phone line. Your data can be easily intercepted with a remote phone line scanner. In a TCP/IP network, on the contrary, you can use the power of a VPN (Virtual Private Networking), SSH or any other secure tunnel to ensure privacy and security.

There are a lot of reasons to move from a direct modem connection to TCP/IP networking. But, how can you do this without investing thousands into new software? Virtual Modem from FabulaTech provides a cheap and effective solution. This program creates virtual modems that use your local network or the Internet instead of a physical phone line.

How does it work? The virtual modems are accessible to all the applications that work through a direct modem connection. Setup is no different from setting up a physical modem. You simply select a virtual COM port in your communication application settings. The application can control the virtual modem directly by sending AT commands or with TAPI (MS Windows Telephony API). Thus, Virtual Modem should work out-of-the-box for all your communication programs.

One of the very useful Virtual Modem features is its "Address Book". The Address Book allows you to transparently translate phone numbers into IP addresses. You don't even have to change the phone numbers in your communication programs. Just put them into your Address Book.

MarshallSoft SMTP/POP3/IMAP Visual dBase email component library (SEE4DB) uses a simple API to send and receive mail, including HTML, MIME Base64 and quoted-printable encoded attachments, from within an application. Supports all versions of Visual dBase. Knowledge of Winsock and TCP/IP is not needed. Features of SEE4DB include: Send email with inline HTML, GIF, TIF, JPG, BMP and Rich Text attachments. Supports ISO-8859 and UTF-8 character coding. Get the number of messages on your email server. Get the header lines from any email on your server without reading the entire email. Delete any email on the server without downloading the entire email. Copy any email on the server without deleting it. Receive any email on your server including MIME attachments. Download email from your server, automatically decoding MIME attachments. Copy email and navigate between IMAP mailboxes. Dozens of switches that control how email is sent and received. Run up to 128 independent WIN32 threads concurrently. Supports SMTP (ESMTP) and POP3 authentication. Supports multiple (simultaneous) connections. Supports bulk mail on a distribution list. Set return receipt; add TO, CC, BCC recipients. SEE4FP is a standard Windows DLL that does not depend on support libraries. Makes calls to Windows API functions only. The same SEE32.DLL can be called from any supported language. Also use with Delphi, Visual FoxPro, VB.Net, PowerBASIC (PB/CC, PB/DLL, PB/WIN), Visual FoxPro, Visual dBase, Xbase++, and COBOL. Free technical support and updates for one year. Royalty free distribution with your compiled application. A large selection of example programs is included. SEE4DB can be used in the development of Win32 applications running under Win 95/98/Me/NT/2000/XP/Vista. The evaulation version is fully functional. No unlock code is required.

MarshallSoft SMTP/POP3/IMAP Visual FoxPro email component library (SEE4FP) uses a simple API to send and receive mail, including HTML, MIME Base64 and quoted-printable encoded attachments, from within an application. Supports all versions of Visual FoxPro. Knowledge of Winsock and TCP/IP is not needed. Features of SEE4FP include: Send email with inline HTML, GIF, TIF, JPG, BMP and Rich Text attachments. Supports ISO-8859 and UTF-8 character coding. Get the number of messages on your email server. Get the header lines from any email on your server without reading the entire email. Delete any email on the server without downloading the entire email. Copy any email on the server without deleting it. Receive any email on your server including MIME attachments. Download email from your server, automatically decoding MIME attachments. Copy email and navigate between IMAP mailboxes. Dozens of switches that control how email is sent and received. Run up to 128 independent WIN32 threads concurrently. Supports SMTP (ESMTP) and POP3 authentication. Supports multiple (simultaneous) connections. Supports bulk mail on a distribution list. Set return receipt; add TO, CC, BCC recipients. SEE4FP is a standard Windows DLL that does not depend on support libraries. Makes calls to Windows API functions only. The same SEE32.DLL can be called from any supported language. Also use with Delphi, Visual FoxPro, VB.Net, PowerBASIC (PB/CC, PB/DLL, PB/WIN), Visual FoxPro, Visual dBase, Xbase++, and COBOL. Free technical support and updates for one year. Royalty free distribution with your compiled application. A large selection of example programs is included. SEE4FP can be used in the development of Win32 applications running under Win 95/98/Me/NT/2000/XP/Vista. The evaulation version is fully functional. No unlock code is required.

MarshallSoft SMTP/POP3/IMAP Delphi email component library (SEE4D) uses a simple API to send and receive mail, including HTML, MIME Base64 and quoted-printable encoded attachments, from within an application. Supports all versions of Delphi, Delphi for Win32, and Delphi for .NET. Knowledge of Winsock and TCP/IP is not needed. Features of SEE4D include: Send email with inline HTML, GIF, TIF, JPG, BMP and Rich Text attachments. Supports ISO-8859 and UTF-8 character coding. Get the number of messages on your email server. Get the header lines from any email on your server without reading the entire email. Delete any email on the server without downloading the entire email. Copy any email on the server without deleting it. Receive any email on your server including MIME attachments. Download email from your server, automatically decoding MIME attachments. Copy email and navigate between IMAP mailboxes. Dozens of switches that control how email is sent and received. Run up to 128 independent WIN32 threads concurrently. Supports SMTP (ESMTP) and POP3 authentication. Supports multiple (simultaneous) connections. Supports bulk mail on a distribution list. Set return receipt; add TO, CC, BCC recipients. SEE4D is a standard Windows DLL that does not depend on support libraries. Makes calls to Windows API functions only. The same SEE32.DLL can be called from any supported language. Also use with C/C++/C#, Visual Basic, PowerBASIC (PB/CC, PB/DLL, PB/WIN), Visual FoxPro, Visual dBase, Xbase++, and COBOL. Free technical support and updates for one year. Royalty free distribution with your compiled application. A large selection of example programs is included. SEE4D can be used in the development of Win32 applications running under Win 95/98/Me/NT/2000/XP/Vista. The evaulation version is fully functional. No unlock code is required.

You may be a professional hardware or network engineer, or a college student making his first steps towards a professional career, or a talented technology lover illuminated by a new bright technical idea and looking for a handy tool for fine-tuning your hardware-software communications. Whichever the case may be, look no further than Advanced TCP/IP Data Logger, for it may well satisfy all of your technical needs. The program allows you to collect network data from any device or instrument in real time, send and receive serial data over the Internet or your LAN. Mold your dataflow the way you want with a built-in parser and channel it to any application, DOS- or Windows-based. If you have several terminal servers working simultaneously, do not worry - Advanced TCP/IP Data Logger can handle multiple ports at once and record the data to a hard disk or any specified location! This is not just a standalone application that you may accidentally close and lose valuable data - Advanced TCP/IP Data Logger can work as a Windows service, which means that users may log on and off the workstation, and the program will be there recording your information, capturing every precious bit. All that functionality and power at a less-than-affordable price!

Key features:
* Capability to log multiple TCP/IP ports simultaneously;
* Server/client operation modes;
* Variable format file forming setting (on time, data, size and etc.);
* Advanced data parsers that allows you to parse, filter and format your source data of various complexity levels;
* Data export to any ODBC-compatible database (MS SQL, Oracle, MS Access, MS Excel, dBase and others);
* Advanced TCP/IP Data Logger can use direct connection (using OLE) to Microsoft Excel and write data directly to rows or columns;
* Improved data formatting.
* Plug-ins support;
* Simple and intuitive setup wizard - no programming required to start collecting data;
* Supports all Windows versions: 9x/Me/NT/2000/XP.

WebDelegator is a server solution that permits a collection of web servers to be hosted on a single IP address. The software accepts connections on a particular address, and establishes connections to the appropriate web server to fulfill the requests. The HTTP request header is used to determine the destination web server, and to preserve the IP address of the originator. Administrative web interface allows the monitoring of connection and data transfer statistics. Access control lists allow the filtering of incoming connections. Optionally integrates with Internet Information Services (IIS) for its advanced abilities.

Network Serial Port Kit allows you to connect any serial port devices over the TCP/IP network or Internet. Creation of local virtual serial ports pairs are available as well.

Program creates up to 254 virtual serial ports at a time. Physical COM ports located on remote computer can be connected to host computer over the network as well. You can connect data collection serial devices: bar code scanners, modems, sensors, meters, gages, RF equipment, telephone PBX systems, laboratory or industrial instruments, and so on - to the serial ports of your computer to deliver that data anywhere over any TCP/IP based network.

For example you can convert usual PC to "Serial Port Server" so then you can connect any serial device directly to a TCP/IP network and communicate with that device from any other PC in the same network or across the Internet. This allows you to use existing Windows based serial communications software to send and receive data to remote serial device across a network.

The best way to check your web or FTP site is running correctly is to access a web page or file - just like a user would do. The Sentry-go Quick Web Monitor allows just that! With it you can quickly, easily & cost effectively monitor your entire IIS Web Server environment. In addition to the underlying server, other features include HTML content & ASP monitoring, web site & web page availability, FTP site & file availability, internet service (ports) access, and entries written to IIS log file & local Event Logs. If problems are detected, it can either take automatic action, or alert you before end-users are affected. Using its in-built web-based reporting, you also have immediate access to monitored information direct from your web browser. Check key web pages are available via both HTTP and HTTPS, verify the page returned is correct or report any that have been changed. Check that your FTP server accepts and delivers files as you would expect. Monitor TCP/IP ports to ensure your server is correctly listening for inbound requests. Monitor & automatically restart key Windows & IIS related services. Additionally monitor any custom service running on the server. In addition to Event Log monitoring, you can also monitor the primary IIS log file - which can be used to track page & file delivery, as well as HTTP errors returned in response to client requests - highlighting broken links etc. The built-in web server provides instant access to both previous alerts, current monitored values and other reports, allowing you to access the information you need directly from your desktop. Alerts can also be viewed instantly from your desktop via the Quick Monitor Console. You can configure the monitor either locally or centrally using the Sentry-go Quick Monitor Console. The monitor can be configured either locally or centrally using the Sentry-go Quick Monitor Console.

Internet Traffic Agent is an efficient network tool for detailed internet traffic monitoring. Internet Traffic Agent monitors traffic on any IP address that the user has visited and keeps daily traffic statistics. This utility captures all IP packets in the local area network. With Internet Traffic Agent, it is possible to detect the network traffic used by any application. The utility can also measure the Internet or LAN traffic of specific users. Using Internet Traffic Agent, it is both possible to detect the most active users or monitor your own network activity.

Internet Traffic Agent counts local, internet and http traffic statistics separately. It provides detailed daily statistics on any IP-address, that the user has visited. Internet Traffic Agent allows easy setting of unlimited number of filters. The utility shows history statistics for each filter. What is important, Internet Traffic Agent shows the geographical location of any IP-address (country) and the server hostname.

The utility has a transparent user-friendly interface and is very simple in use. Its interface can be easily customized thanks to changeable grid lines and colors. For more convenience, the program can be run on Windows startup, minimized on program startup or hidden in the taskbar. It is possible to suspend and resume the monitoring of traffic at any time. This software will be useful for network system administrators, Small Office/Home Office owners and any users, who want to know their network traffic activity. Registered users are entitled to free updates and free and quality e-mail technical support as well. Available for Windows 2000/XP/2003/Vista.

datAxe is a flexible converter to solve all your needs between serial data and TCP/IP networks on Windows computers. datAxe software package makes serial data from your PC available on TCP/IP-based networks and makes TCP/IP data available on physical and virtual serial ports of your PC. datAxe supports two transport data stream protocols: Raw Connection and Telnet datAxe supports full two-way I/O for full control of serial instruments (i.e. any instrument that you can plug into the serial port (RS232, RS422 or RS485) of your PC) to make them part of your local area network (LAN) or internet. Thus you can send and receive serial data between remote computers, devices and applications. With datAxe you can also create virtual ports and configure them to communicate with TCP/IP-networks. duplAxe component of datAxe makes it possible to build and start up virtual serial port pairs (COM port pairs) to enable also your local applications to exchange serial data directly with each other. The main utility of datAxe, the Comport application allows any other computer on the same network to send and receive serial data through a remote serial port on the PC where Comport is running. You can connect to the remote serial port by connecting to a TCP/IP port. Comport can also be used to pass serial data across a corporate intranet or over the Internet. Comport allows multiple sessions to run simultaneously but each with different serial port.

Serial over Ethernet allows you to share up to 255 serial port devices over a TCP/IP network turning your computer into a low-cost terminal server. As a result, any serial port device connected to a COM port could be accessed from anywhere in the world as if it were attached to the local PC.

When the attached serial port device sends communication data, it will actually be transmitted over a TCP/IP network. Such behavior is achieved due to the use of virtual serial port technology which emulates standard COM ports. In this case, the Windows OS treats virtual serial ports in the same way as real ones therefore you are no longer limited to just two real ports (the number of physical ports you have) per system and can create COM port connections without occupying a real serial port.

Serial over Ethernet provides the ability to create several connection types for three main purposes: share serial port for incoming connections (Server), connect serial port to remote host (Client) and share serial port using UDP. Starting from version 5.0, all SEC internal drivers for Windows Vista and Server 2008 are digitally signed by Microsoft.

Safabyte Network Suite helps you to build scalable Internet/Intranet client and server applications with flexible and easy-to-use components designing for rapid development without the complexities of working with native socket class or in-depth knowledge of how the protocols are implemented. The ICMP component enables your application to send ECHO requests, receive the echo reply message, show and check it, while the Trace Route component enables performing Internet route tracing to determined network delays and topology. The DNS component makes the work of querying DNS servers for resource record types more easily. The DomainWhoIs will perform domain registration lookups with a few lines of code. The FTP component offers a number of classes that make the work of transfering files directly from your application using FTP/SSL and SFTP easily. The Proxy component provides an elegant way to to send data to a host through a proxy server. And the Internet Time component enables your .NET applications get exact time from public time servers over the Internet.

Advanced Network Monitor 2.3 is an advanced, powerful, and feature rich tool that monitors servers located on your local network and the Internet. Advanced Network Monitor will allow the Administrator to increase the reliability and productivity of your corporate servers.
After problems are found on the monitored servers Advanced Network Monitor will first try to correct the problems. If ANM cannot correct the problems it immediately notifies the Administrator about the problem via e-mail, sms or a network messaging service. Using Advanced Network Monitor the Administrator is aware about the state of their servers at any time.

Advanced Network Monitor allows you to monitor the following servers and protocols:
TCP/IP, Ping, HTTP, FTP, UDP, SMTP, POP3, IMAP, Telnet, NNTP, DNS, Socks Proxy, DHCP, PHP, Event Log, Service State, RAS Server, VB/Java Script, Terminal Service, WINS, Performance Counter, Registry check, NetBIOS, SNMP, LDAP, SNTP, Oracle, MSSQL, Interbase, ODBC, BDE, Disk space, File existence and External Application tests.

Advanced Network Monitor can execute the following Alerts if one of the server tests will fail:
Send WinPopup message, Show Message, Play Sound, Speak alert using TTS, Send email, Write to Event Log, Restart Service, Restart computer, Execute VBScript/Jscript, Execute ODBC/BDE SQL Query, Execute external application, Write To Text file.

The appointments automation into a facillity. Coordinate appointments with customers. Keep the procedure progress from "appointment call", to reception, to the therapist until to payment. The incoming task emerges as "Activities to do" on the terminal of the assignee (user). After the user finishes the job he/she forwards the task, with any number and kind of attached documents to it. The "operations manager" can see at any time what tasks are running, their past history, users that have been assgned and assingment and finish time. All this information is important in order to evaluate every employee's contribution into the company. Every task assignment procedure is coordinated by an intellingent agent, named "APPOINTMENT_MANAGER". The agent's action plan (process code) and cooperation with users (production code) are displayed in the Developer->Agent Prototypes. A flowchart is automaticaly created to show the workflow of the procedure but also the progress of a running procedure. In order the application to run in multi user mode, using 3 tier configuration, needs an Application Server (a low-priced one) and Clients (that can be freely downloaded). The application can be freely redesigned (forms, menu, database schema, agent code,...) by an application programmer. In order to modify, test and run the agent a special debuger exists. The debuger in the same machine runs debugged not only the action plan of the agent but also the code of the activities that are assigned to users (in other machines). This way the "agent bulding" becomes a trivial programming task. In the action plan of the agent can be applied wait states, parallel execution split, and joins, or joins, ad hoc parallel splits and subprocess execution.

The incoming order automation into a company. Put orders and execute them.The order along with the products goes to the production lines. There every product starts to manifactured at the same time. The incoming task emerges as "Activities to do" on the terminal of the assignee (user). After the user finishes the job he/she forwards the task, with any number and kind of attached documents to it. The "operations manager" can see at any time what tasks are running, their past history, users that have been assgned and assingment and finish time. All this information is important in order to evaluate every employee's contribution into the company. Every task assignment procedure is coordinated by an intellingent agent, named "ORDER_MANAGER". The agent's action plan (process code) and cooperation with users (production code) are displayed in the Developer->Agent Prototypes. A flowchart is automaticaly created to show the workflow of the procedure but also the progress of a running procedure. In order the application to run in multi user mode, using 3 tier configuration, needs an Application Server (a low-priced one) and Clients (that can be freely downloaded). The application can be freely redesigned (forms, menu, database schema, agent code,...) by an application programmer. In order to modify, test and run the agent a special debuger exists. The debuger in the same machine runs debugged not only the action plan of the agent but also the code of the activities that are assigned to users (in other machines). This way the "agent bulding" becomes a trivial programming task. In the action plan of the agent can be applied wait states, parallel execution split, and joins, or joins, ad hoc parallel splits and subprocess execution.

The car service automation program. Get service orders and excecute them. The customer put service call to company. The application handles all the process of car servicing, starting from the gate reception, to disassembling and disassembling. The incoming task emerges as "Activities to do" on the terminal of the assignee (user). After the user finishes the job he/she forwards the task, with any number and kind of attached documents to it. The "operations manager" can see at any time what tasks are running, their past history, users that have been assgned and assingment and finish time. All this information is important in order to evaluate every employee's contribution into the company. Every task assignment procedure is coordinated by an intellingent agent, named "SERVICE_MANAGER". The agent's action plan (process code) and cooperation with users (production code) are displayed in the Developer->Agent Prototypes. A flowchart is automaticaly created to show the workflow of the procedure but also the progress of a running procedure. In order the application to run in multi user mode, using 3 tier configuration, needs an Application Server (a low-priced one) and Clients (that can be freely downloaded). The application can be freely redesigned (forms, menu, database schema, agent code,...) by an application programmer. In order to modify, test and run the agent a special debuger exists. The debuger in the same machine runs debugged not only the action plan of the agent but also the code of the activities that are assigned to users (in other machines). This way the "agent bulding" becomes a trivial programming task. In the action plan of the agent can be applied wait states, parallel execution split, and joins, or joins, ad hoc parallel splits and subprocess execution.

The Task assignment automation into a company.You can assign tasks to users, by name or by position into the company or organization. The incoming task emerges as "Activities to do" on the terminal of the assignee (user). After the user finishes the job he/she forwards the task, with any number and kind of attached documents to it. The "operations manager" can see at any time what tasks are running, their past history, users that have been assgned and assingment and finish time. All this information is important in order to evaluate every employee's contribution into the company. Every task assignment procedure is coordinated by an intellingent agent, named "TASK_MANAGER". The agent's action plan (process code) and cooperation with users (production code) are displayed in the Developer->Agent Prototypes. A flowchart is automaticaly created to show the workflow of the procedure but also the progress of a running procedure. In order the application to run in multi user mode, using 3 tier configuration, needs an Application Server (a low-priced one) and Clients (that can be freely downloaded). The application can be freely redesigned (forms, menu, database schema, agent code,...) by an application programmer. In order to modify, test and run the agent a special debuger exists. The debuger in the same machine runs debugged not only the action plan of the agent but also the code of the activities that are assigned to users (in other machines). This way the "agent bulding" becomes a trivial programming task. In the action plan of the agent can be applied wait states, parallel execution split, and joins, or joins, ad hoc parallel splits and subprocess execution.

kosmos AutoPilot Developer is a RAD tool for programming business processes into usual Business Applications that use a Database. The applications run in 3 tier mode, right out of the box. Using this tool the developer can construct software agents that have a role as procedure coordinators, planners and experts. The agents are written with AutoScript, the scripting tool of AutoPilot Developer. Here the agent can assign activities to users and wait to finish. A flowchart is automaticaly created to show the workflow of the procedure but also the progress of a running procedure. In order the application to run in multi user mode, using 3 tier configuration, needs an Application Server (a low-priced one) and Clients (that can be freely downloaded). The applications can be easily designed (forms, menu, database schema, agent code,...) by an application programmer. In order to modify, test and run the agent a special debuger exists. The debuger in the same machine runs debugged not only the action plan of the agent but also the code of the activities that are assigned to users (in other machines). This way the "agent bulding" becomes a trivial programming task. In the action plan of the agent can be applied wait states, parallel execution split, and joins, or joins, ad hoc parallel splits and subprocess execution.

Hierarchical maps: complete end-to-end network view and inventory. Autodisc.24 x 7 performance and availability monitoring at multiple levels: network/map/submap/device/interface. Scalable to virtually unlimited number of network nodes (still GreatNMS server can be simple WinXP or Vista PC). Auto-discovery (via SNMP, TCP/IP and Microsoft Domains). Graphical links representation and link status background monitoring. Capability to manage / monitor any vendor SNMP or TCP/IP compliant devices Capability to compile 3rd party SNMP MIBs and create corresponding custom devices types. GUI Capability to build custom MIB monitoring application and assign it to 3rd party devices. Client-server multi-user system with multiple user profiles. Optional capability to use MS Windows Authentication and profiles. Rich and friendly GUI available to simultaneous users both locally (at the server) and via remote Web-based console. Secure remote HTTPS access via Web Browser, no special client software installation is required. Encryption and password system corresponds to the requirements of US Department of Defense. All SNMP versions supported (SNMPv1, SNMPv2, and SNMPv3). Embedded Telnet/Telnet over SSL/SSH/TL-1 configuration option for non-SNMP compliant devices. Both IPv4 and IPv6 supported. TFTP client and server included.sysLog client and server included. HOST-MIB GUI support: CPUs load monitoring with thresholds alarms, software inventory report for all the devices supporting HOST-MIB (like Windows computers).RMON-MIB groups 1, 2, 3, and 9 GUI are supported for any RMON capable devices. GUI support for many other standard SNMP MIBs. MIB Browser included., Included special support for Cisco SNMP agents and MS Windows SNMP agents.E-mail notification of alarms with customized filters. Alarms are kept in standard SQL Database (Microsoft SQL Server Express is installed with GreatNMS). Allows viewing/reporting alarms per submap/device/port/interface..Northbound TL1,XML,SNMP.