Advanced Search - (Search in: Keywords) - Page # 1 of 1

A simple solution in the complex world of the Unified Messaging System

Automatic voice autoresponder. Simple and configurable.

Sniff-em Packet Sniffer and Network analyzer is a new network management tool designed from the ground up with ease and functionality in mind. An award-winning packet sniffer and network protocol analyzer, which boasts a connection-oriented view for analyzing packets increasing effectivness. With this Sniffer, all you need to do is to set up the filter, start capturing, and view connections, packets as well as data in realtime.
Key Features:
* Capture from Dial up adapters, organize and filter captured packets in a connection-oriented view.
* Capture with no packet loss.
* On-the-fly content viewing while capturing and decoding.
* Parse and decode an variety of network protocol.
* Encrypt your files with tamper resistent technology.
* Monitor your network, your familiy or your kids
* Boasts a very flexible filtering system, filter for email, www, Instant messaging.
* Uses of Sniff-em packet sniffer are near infinite

We design special screensavers and wall-papers for IT/Networking professionals and students, who will display our art on their computer screens for months or years. Screensavers are widely displayed on people's PCs for months, even years. Marketing messages, product names and corporate logos and active links to your websites can be designed into the screensaver. You may also bundle a small demo of your software or other products with the screensaver and distribute it widely with it. It is a very economical and effective tool for product awareness, corporate branding, and web traffic. Contact us today for your screensaver design, distribution and more.

Etherscan Analyzer is an advanced network sniffer and protocol analyzer for Windows. With Etherscan, you can capture and analyze all packets over the local network. Etherscan decodes all major protocols, including Ethernet, NetBEUI, TCP/IP, and others. Packets are decoded down to the lowest layer with analysis of the most protocols and full access to raw data is provided. Etherscan Analyzer is capable of reconstructing TCP/IP sessions. With this feature, you can easily view data in their original format, for example, you will be able to read the actual text of an email - as well as any attachment - exactly as it was sent.
With Etherscan you are able to filter for specific traffic easily. Using these flexible, powerful filters during or after capture you can isolate traffic by specific node, protocol, error type and/or packet content. Also you can set aliases to IP or MAC addresses.
Etherscan Analyzer is a helpful tool for LAN administrators, security professionals, network programmers, or anyone who wants to have a full picture of the traffic going through one's PC or LAN segment. This application is designed for Internet users and small and medium-sized networks and can run on any Windows

We design special screensavers and wall-papers for IT/Networking professionals and students, who will display our art on their computer screens for months or years. Screensavers are widely displayed on people's PCs for months, even years. Marketing messages, product names and corporate logos and active links to your websites can be designed into the screensaver. You may also bundle a small demo of your software or other products with the screensaver and distribute it widely with it. It is a very economical and effective tool for product awareness, corporate branding, and web traffic. Contact us today for your screensaver design, distribution and more.

Connect an Amiga with one or more PCs, and access Amiga resources (e.g. files, floppy and hard disk images, ROM transfer, etc.) from the Windows desktop. Features a revolutionary self-install technology that requires no additional Amiga software (PC filing system, terminal software, etc.) Supports serial and TCP/IP connections, including Bluetooth and Wi-Fi. Available in a standalone package or as part of Amiga Forever.

LAN and WLAN Sniffer. A program for low-level network packets capturing and analyzing in real-time. Includes: ICQ, AIM, IRC, MSN analyzers and ARP-spoofer. Allows to capture all network traffic even in switched LAN. Sniffer supports parsing of following protocols: IP, TCP, UDP and many others, Also includes: tcpdump, tcpflow, tcpstat.

Main Features

* GUI analyzers for many popular protocols: IP, TCP, UDP...
* Analyzers for popular IM protocols: AIM/ICQ, MSN, IRC, Email
* Command line utilities, ported from UNIX: tcpdump, tcpflow, tcpstat
* Cross-platformed Remote Agent with source-code.
* Support of Wi-Fi chipsets: WaveLAN/Prism2, Prism54, Atheros

Serial to Ethernet Connector is an advanced software solution developed to share serial port devices over TCP/IP network. Thus, any serial port device connected to COM port at local PC could be accessed from anywhere in the world via internet, for example. When the attached serial port device sends communication data it will be actually transmitted over TCP/IP network. Such behavior is achieved due to the use of virtual serial port technology which emulates standard COM ports. In that case Windows OS treats virtual serial ports in the same way as real ones therefore you are no longer limited to just two real ports (any number of physical ports you have) per system and may create COM port connections without occupying any real serial port. Formerly known as VSPD.Net, Serial to Ethernet Connector has a completely new interface and greatly revamped engine. It allows you to use three different types to connect to remote computer. The first type is port-to-port connection, which lets you connect two computers through TCP/IP network. In this way you can emulate virtual null-modem cable connection. Serial to Ethernet Connector allows you to customize remote serial port settings locally or dynamically fetch these settings from the remote end. Second type is the port-to-TCP client, which allows you to connect to remote server and send/receive communication serial data over TCP/IP network. Once connection is established, all data sent from remote serial port device, attached to the server, will be genuinely delivered to local serial port where it can be further processed. The last type is the port-to-TCP server which allows you establish multiple connections to local serial port device and redistribute COM port device data all over the world. Server listens to all incoming connections at the defined TCP port and redirects input/output serial data to TCP/IP network. Serial to Ethernet Connector can be easily configured for current demands.

A "Must have" quick reference for IT/Networking professionals and students who are learning and using Ethernet; Comprehensive Map focus on Ethernet related protocol; Detailed info on Ethernet LAN, VLAN and metro Ethernet. Formatted in the 8.25 in x 11 in paper size for easy printing and use as a portable reference.

Access your local USB devices while working in remote Windows session. Sometimes, while working in remote desktop, you need access to your local devices. You can easily redirect disk drive or a printer into remote Windows session. But why can't you redirect all the rest of your USB devices just as easily? Unfortunately there is no standard way to make local USB devices available in remote Windows session. The only standard solution is plugging USB device directly to the remote server. But in the most of cases that is not acceptable. FabulaTech has resolved this problem in other extraordinary way. We've created USB for Remote Desktop that allows to work with your local USB devices from remote Windows session. Access your local USB devices while working in remote Windows session. Sometimes, while working in remote desktop, you need access to your local devices. You can easily redirect disk drive or a printer into remote Windows session. But why can't you redirect all the rest of your USB devices just as easily? Unfortunately there is no standard way to make local USB devices available in remote Windows session. The only standard solution is plugging USB device directly to the remote server. But in the most of cases that is not acceptable. FabulaTech has resolved this problem in other extraordinary way. We've created USB for Remote Desktop that allows to work with your local USB devices from remote Windows session. The program consists of a Server and a Workstation. You should install the Workstation on the computer to which the USB device is physically connected. Server side should be installed on the remote server from which you need to access your devices. USB for Remote Desktop is easy to install and use. It supports a wide range of USB devices. The program does not require any special knowledge and installs easily right out of the box.

Program implements wake-on-lan function. Wake up remote computer. MAC address resolve of remote PC. Keeps the list of computers, export and import of the list. Supported command line. This is a freeware!

TimeTools digital wall clock ntp time synchroniser software is a freeware application that runs on any Windows platform. It allows a windows sntp time client to synchronise time to a selected Atomic Clock synchronised NTP time server.

USB to Ethernet Connector lets you connect to any USB device located on a remote PC on a local network or the Internet. You will be able to work with it as with a local USB device and applications working with it won't even see the difference. USB to Ethernet Connector works with a USB driver at the system level. It intercepts USB port activity for the shared device and redirects it via TCP/IP to a remote site, where it is handled appropriately. To achieve such functionality, USB to Ethernet Connector is installed on both computers that take part in the communication process. Therefore, USB to Ethernet uses client-server architecture (server side has the USB device physically attached to it, while client side connects to remote server and uses the services it provides), but each side can be a client and a server at the same time. USB to Ethernet Connector shares USB ports rather than devices. The benefit of this approach is that you may plug in a USB device, connect to it from the remote host, detach the device and plug in another one, and it will automatically appear at the client side. Among its key-features are an unlimited number of USB devices that can be shared, auto-connecting to new USB devices whenever you plug them in and working with virtual machines. Shared USB ports are also automatically re-configured every time you boot your PC. The program is fully compatible with Windows 2000/XP/2003/Vista and with HyperThreaded and multi-processor systems. An advanced and robust architecture, network traffic encryption, a wide range of supported USB devices and standards and the simplicity of use make USB to Ethernet Connector a real pleasure to work with.

Network Serial Port Kit allows you to connect any serial port devices over the TCP/IP network or Internet. Creation of local virtual serial ports pairs are available as well.

Program creates up to 254 virtual serial ports at a time. Physical COM ports located on remote computer can be connected to host computer over the network as well. You can connect data collection serial devices: bar code scanners, modems, sensors, meters, gages, RF equipment, telephone PBX systems, laboratory or industrial instruments, and so on - to the serial ports of your computer to deliver that data anywhere over any TCP/IP based network.

For example you can convert usual PC to "Serial Port Server" so then you can connect any serial device directly to a TCP/IP network and communicate with that device from any other PC in the same network or across the Internet. This allows you to use existing Windows based serial communications software to send and receive data to remote serial device across a network.

Colasoft Ping Tool is a powerful graphic ping tool, it supports ping multiple IP addresses at the same time, and compares response time in a graphic chart. You can view historical charts and save the charts to a *.bmp file. With this build-in tool, users can ping the IP addresses of captured packets in Colasoft Capsa (if applicable) conveniently, including resource IP, destination IP and both of them.

Colasoft Ping tool will highlight the item in the graph chart and popup an annotation contains the domain name and response time when you push your mouse cursor on it.

Colasoft MAC Scanner is a scan tool using to scan IP address and MAC address. It can automatically detect all subnets according to the IP addresses configured on multiple NICs of a machine and scan the MAC addresses and IP addresses of defined subnets as your need. Users can custom own scan process by specifying the subsequent threads.

Colasoft Packet Builder is useful tool used for creating custom network packets, you can use this tool to check your network protection against attacks and intruders. Colasoft Packet Builder provides you very powerful editing feature, besides common HEX editing raw data, it featuring a Decoding Editor which allows you edit specific protocol field value much easier. In addition to building packets, Colasoft Packet Builder also supports saving packets to packet files and sending packets to network.

Colasoft Packet Builder provides several kinds of common-used packet - ARP Packet, IP Packet, TCP Packet and UDP Packet. All packets and their decode information are editable. Users can create a most poplar packet according to the template provided by Colasoft Packet Builder conveniently.

Colasoft Packet Player is a replay tool which allows you to open captured packet trace file and playback in the network. Colasoft Packet Player supports many packet trace file formats created by many sniffer software, such as Colasoft Capsa, Ethereal, Network General Sniffer and WildPackets EtherPeek/OmniPeek etc, it also support burst mode and loop sending feature.

USB over IP Network lets you connect to any USB device located on a remote PC on a local network or the Internet. You will be able to work with it as with a local USB device and applications working with it won't even see the difference. USB over IP Network works with a USB driver at the system level. It intercepts USB port activity for the shared device and redirects it via TCP/IP to a remote site, where it is handled appropriately. To achieve such functionality, USB over IP Network is installed on both computers that take part in the communication process. Therefore, USB over IP Network uses client-server architecture (server side has the USB device physically attached to it, while client side connects to remote server and uses the services it provides), but each side can be a client and a server at the same time. USB over IP Network shares USB ports rather than devices. The benefit of this approach is that you may plug in a USB device, connect to it from the remote host, detach the device and plug in another one, and it will automatically appear at the client side. Among its key-features are an unlimited number of USB devices that can be shared, auto-connecting to new USB devices whenever you plug them in and working with virtual machines. Shared USB ports are also automatically re-configured every time you boot your PC. The program is fully compatible with Windows 2000/XP/2003 and with HyperThreaded and multi-processor systems. An advanced and robust architecture, a wide range of supported USB devices and standards, and the simplicity of use make USB over IP Network a real pleasure to work with.

TracePlus/Ethernet is a powerful network monitoring, performance, and capture tool supporting 10-1000 MB/s Ethernet networks. 32 and 64 bit drivers are compatible with all Windows platforms. Network dashboard displays network performance updated each second. Provides details on bandwith by IP, top URLs, port activity, and traffic flow. Capture packets based on type, address, size, TCP/UDP port, or data pattern. Decodes IPv6 and SNMP packets. Imports and exports capture files from other packet analyzers including UNIX and Linux OS's. Supports IPv6, ICMPv6, and VLAN features of the 802.1Q/802.1P protocols.

Solution for integration of the computer network management and data pre-processing with SCADA using OPC interface or Web Services

It has the following features:

- implemented OPC specifications:OPC DA 3.0, 2.05,1.0, OPC XML DA, OPC Alarms and Events Version 1.1 and 1.0
- implemented protocols: SNMPv2c, SNMPv1
- using SNMP commands GET, SET and traps
- using ping to manage devices without running SNMP agent and displaying of round trip time as one OPC variable
- tags in address space of the OPC server are defined using MIB object identifier (Object ID), for example .1.3.6.1.4.1.2681.1.2.102; defined Object ID's can be validated by input in OPC configurator
- the possibility to manage max. 10 devices with running SNMP agent
- implementation of MIB Browser, which scans SNMP manageable device for its SNMP variables that correspond to MIB objects (in the basic version, browsed items can not be added to OPC address space)
- IP Scanner, which is used for scanning computer network communities in defined IP area

Installation package contains:

- SNMP OPC Server configurator
- runtime application (SNMP OPC Server process)
- OPC XML-DA wrapper
- source code examples for OPC test clients (written in VB6 and VB.NET) for the communication with SNMP OPC server, using OPC DA3 interface or Web Services

Serial over Ethernet allows you to share up to 255 serial port devices over a TCP/IP network turning your computer into a low-cost terminal server. As a result, any serial port device connected to a COM port could be accessed from anywhere in the world as if it were attached to the local PC.

When the attached serial port device sends communication data, it will actually be transmitted over a TCP/IP network. Such behavior is achieved due to the use of virtual serial port technology which emulates standard COM ports. In this case, the Windows OS treats virtual serial ports in the same way as real ones therefore you are no longer limited to just two real ports (the number of physical ports you have) per system and can create COM port connections without occupying a real serial port.

Serial over Ethernet provides the ability to create several connection types for three main purposes: share serial port for incoming connections (Server), connect serial port to remote host (Client) and share serial port using UDP. Starting from version 5.0, all SEC internal drivers for Windows Vista and Server 2008 are digitally signed by Microsoft.

To access the shared devices over Internet or local network there is no need to purchase additional hardware devices. USB over Ethernet is completely software solution! And it uses hardware of your computer only. USB over Ethernet allows both to share USB device and connect shared devices remotely. To share the device you just need to install this program both on the computer where your USB device is plugged in and on the PC where you are going to use USB device remotely. USB over Ethernet is easy to install and use. It supports a wide range of USB devices. The program does not require any special knowledge and installs easily right out of the box.

Wake-on-LAN Packet sniffer is designed to troubleshoot and setup Wake-on-LAN entire your Network. It allows to check whether the target machine recieve the packet. Program will display all incoming "Magic Packets".

Nicmonitor is an utility which provides an accurate account of the data which is flowing through your computer's network connection at any given moment. This readout is presented in both numerical and graphical format, in real time. Nicmonitor includes extensive logging facility, flexible events system, and more. It supports Windows XP,2003,2008 and Vista! Nicmonitor works with virtually all types of network connections: phone modems, DSL, cable modem, LAN, satellite, and more.

So you went out and bought yourself a couple of nice USB external backup drives for your home and office, and all of your most important files are stored on them. But what happens when you're sitting at home and you really need to get at your work files, or vice versa? Or what if you're actually at home or work, but you're using a different workstation that doesn't have your precious hard drive plugged into it? Do you physically move yourself to the other machine? Do you lose valuable time waiting until you get home (or back to the office) to access your much-needed files? Or do you get a copy of USB Device Share and never be out of touch with your USB peripherals ever again?

USB Device Share lets you share any USB device remotely over the Internet or via LAN. Just install USB Device Share on the computer that has the USB device plugged into it, and any computer that has the client software installed will be able to access that USB device! Imagine being able to tap into your external hard drive from anywhere! Share that expensive USB scanner with every computer in your office or lab setting! Save loads of money by not buying pricey NAS drives or multiple USB peripherals for multiple workstations! Even better, USB Device Share lets you share an UNLIMITED number of USB devices without the need to install drivers!

Besides being incredibly easy to use, USB Device Share comes with a ton of bells and whistles that make it even more useful. You can configure USB Device Share to automatically share any USB peripheral as soon as its plugged into the host machine. You can deny sharing for specific devices, like keyboards. You can even have USB Device Share block or allow selected clients based on their IP address!

So, begin your journey of instant remote access and incredible cost savings with USB Device Share!